Its not very often, but it does happen. A furnace installed in the wrong direction, well at least in my opinion its facing the wrong direction.
Here you see a RHEEM 80% gas furnace facing into the garage. As you can see theres a tool box pushed up against the front of the furnace which makes it very tough to change a filter, never mind servicing.
As you can see above we installed the new American Standard 95% 2 stage variable speed gas furnace 180 degrees from where it was originally. Giving the home owner and service technician easy access. We also added a Honeywell F100 filter bank into the return system for even better filtration system.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
This is proberly one of the easiest types of furnace replacements there is, a 80% Carrier to a 80% American Standard.
Basically the same physical size units, no drain or PVC connections to worry about, just reconnecting the venting and gas. The American Standard 80% furnaces are perfect for smaller homes. And usually fits the budget.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
Another Arcoaire 90% gas furnace goes to the scrap yard as a new American Standard 95% single stage takes its place.
Not only is the new American Standard 95% single stage furnace shorter, it is also has a smaller foot print. All we simply had to was to make and install a small transition to attach to the existing return ducting and then blank off a small portion on the supply base can.
Seeing how the existing furnace was a 90% efficient model we where able to utilize the existing PVC venting as well as the existing drain line.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
The older HEIL 90% gas furnace has lived its life. The exchanger is cracked and the sword burners are shot, I would say the customer got the life out of this furnace.
I don’t have a lot of experience with HEIL, being that there is very few of them installed in our area Im thinking it was more than likely a 2nd line of equipment for some heating company.
Above is the American Standard 95% Single Stage furnace. Even though my favorite furnace is the American Standard 2 Stage Variable Speed in this case (because of ducting and the age of the home) I recommended the single stage.
As you can see the new furnace has the same footprint as the HEIL, I simply had to make an extension from the new furnace to the existing filter system. The existing 2″ PVC had to be increased to 3″ then we reconnected up to the existing gas and drain.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
My newest customers just moved here from Florida only to find out both of their Payne 80% furnaces have cracked heat exchangers. This is not uncommon, in fact its rare not to find cracks in the heat exchangers of this particular brand/model of furnace.
The 2nd floor Payne 80% Furnace was an up-flow furnace. Meaning it blows the hot air upward into the attic where the heated air is delivered through ducts overhead into each the rooms.
As you can see above the new American Standard 95% 2 stage Variable speed furnace has a little larger foot print, some simple transitions helped us slip the new furnace right into place. A condensate pump was added to remove condensation and the venting changed to PVC.
The 1st floor Payne 80% furnace was your typical down-flow furnace, blowing the hot air downward into the crawl space, then ducted to floor registers through out the home.
The new American Standard 95% 2 Stage Variable furnace again was a larger foot print, but a simple transition and new basecan made it very easy to slip into place. The venting changed to PVC and condensate line ran into the existing drain system.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
This older Rheem 80% gas furnace was starting to cost my customer some serious money, money my customer would rather invest in to a new furnace.
And like most standard 80% furnaces installed during this time frame there is no real access to the filters. The customer has to open the furnace and reach up in to the ducting to replace them.
The new American Standard 80% furnace has the exact foot print as the Rheem, this makes very easy for replacement. I added a Honeywell F100 filter bank for easier access and better filtration. The F100 also is convertible to the F300 if their looking for even better filtration down the road.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
This 90% Kenmore furnace has long out lived its life, my customer being a retired engineer was able to keep it going much longer than expected. The secondary heat exchangers where partially clogged making the furnace operate poorly and getting to the point of being a serious safety hazard.
There are not to many occasions when I get to meet the person who actually installed a furnace that IM replacing, my customer did a very good job installing the original furnace, but a good installation out lived its youthfulness in this case.
The new American Standard 95% 2 Stage Variable speed furnace slide right in to place. I had to make a simple supply transition to adapt to the existing supply duct, added a Honeywell F100 4″ pleated air filter system and then re-connect up to the existing venting and condensate. It doesn’t get much easier than this.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.
This older Amana 90% furnace was done, and unfortunately for the sellers of the home it was time to have it replaced. But fortunately for the buyers the we are replacing the furnace.
In the picture above you see a nice wood sided wall, believe it or not it is removable and does hide the furnace very well, but is a major pain in the butt to service the unit.
Once the wall was removed you could see the older Amana unit. What really struck me weird was the filter system was unaccessible because of the drain system located directly in front of the door.
Above is the new American Standard 95% furnace installed in the same location, a base can was add to lift the furnace off the floor and then drain system was routed out of the right of the unit, this of coarse freed up access to the existing Honeywell filter system.
Heating And Cooling Skagit County
Need a Heat Pump, Air Conditioner, Furnace, Boiler or Tankless Water Heater? We install them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and on Camano Is.