Categories
Anacortes Boiler Replacement
Anacortes Boiler Replacement, Iron Fireman To Navien
This Anacortes Boiler Replacement project involved this monster of a boiler, this boiler was burning massive amounts of fuel oil to keep my customers home heated, costing them dearly. They felt it was time for a change to something way more efficient and reliable.
A Test Of Time
When ever I remove a old unit like this I try to imagine what the installers where like, where they young or old? And or perhaps how much effort went into installing such a beast back then. At that time this was cutting edge equipment and they where probably extremely proud of the installation.
The Navien Combi/tankless Unit
As you can see the new Navien CH-240 Combi/tankless unit takes up very little room compared to the older monster of a boiler ... and not only does it heat the home, it heats the hot water as well. I have installed a few of these now with very little issues. They work exactly how they are advertised. The only draw back with this Anacortes Boiler Replacement is that it takes a little longer to get hot water compared to the standard Navien NR-210a tankless.
Conclusion
This Anacortes Boiler Replacement turned out great for our customer, the Navien heats both the home and the hot water(endless) and is super efficient. This is one of my favorite installations and I highly recommend doing this for anyone in the same situation.
Alpine’s BLOG
Alpine Heating And Cooling welcomes you to our BLOG
Please enjoy the various posts and projects in Alpine Heating And Coolings blog. I will be the first to admit I am not a very good writer or even a good speller for that matter, but I do enjoy my trade and enjoy posting about the various projects we do in and around Skagit County, Washington. I hope there is some useful information somewhere in here (Alpines BLOG) for you. Please feel free to leave comments and or to contact me with any questions.
Mount Vernon WA Church Furnace
Mount Vernon WA Church Furnace
There are certain types of heating and cooling projects that really appeal to me, these projects generally have the biggest impact or affect for the customer and are usually the most challenging. This Mount Vernon WA Church Furnace project was for the Church Of Christ in Mount Vernon, their oil furnace was from 1951 and it was a monster. Time for a upgrade!
The Monster In The Room
The furnace was located in the church basement in a room about 9′ by 9′ and it consumed most of that room. I had to stand back out of the room just to take a good picture. One of the biggest challenges with small community Church’s is the furnace sizing. A lot of small Church’s only get occupied say 1 to 2 times per week and the rest of the time the furnace generally stays off. So you have to consider raising the temperature say from 50 degrees to 70 degrees just for a few hours, and within a short period of time. And of coarse keeping the noise level down. Perfect for the American Standard 95% 2 Stage Variable.
American Standard, To The Rescue.
One of the complaints from the church was the down stairs always seemed cold, and even though they had damper controls to help with this issue it never seemed to work correctly, therefore they abandoned that part of the system and went to space heaters. The American Standard 95% Variable 2 Stage furnace with a Honeywell 4″ pleated filter system (above) was installed to deal with just the down stairs, fortunately the existing duct work was zoned to do just that. As you can see the foot print is much smaller than the oil furnace.
Conclusion
Churches have a very unique situation when it comes to heating and cooling demands. In this Mount Vernon WA Church Furnace project an American Standard 95% gas furnace worked out perfectly.
Angie’s List SUPER SERVICE AWARD
Angie’s List SUPER SERVICE AWARD
We have been awarded the Angie’s List SUPER SERVICE AWARD for 2014. Only the top 5% of the HVAC service contractors can receive this award. We try very hard to make our customers happy, and sometimes hard work pays off. Thanks for all the great reviews, we will continue to provide great service to Skagit County.
If you need a Heat Pump, Air Conditioner, Furnace, Boiler, Ductless, Mini-Split or Tankless Water Heater, we have you covered. We install and service them all over Skagit county including Mount Vernon WA, Burlington WA, Anacortes, Sedro Woolley, La Conner, Stanwood WA, and Camano Is.
Bow Wa Heat Pump And Furnace
New Bow Wa Heat Pump.
One of my favorite places in Skagit County is the Bow area. Most of the homes are scattered out and seem to have a fair amount of land. The town of Edison is close by and the Padilla Bay Shore Trail is a great place to take your dog for a walk. This is the area for our Bow Wa Heat Pump project.
Heat Pump VS Lp
Currently propane fuel(LP) is like the most expensive way to heat your home or business, out side of the fact that its a nice hot heat I can not think of any reason why you would choose a propane(LP) furnace over a heat pump. My customer in this case wasn't really thinking about a heat pump, but after educating him a little on the benefits and him doing his own due diligence.... he was sold.
American Standard, The Perfect System?!
I know I know ... I brag a lot about American Standard equipment, there are very good reasons why. Besides of all the countless pieces of equipment that we have installed that have had very little to no issues, American Standard has been listed either #1 or #2 for many years in Consumer Reports, competing only with Trane, and for your information American Standard makes Trane. So if you're not going to take my word for it, look it up in Consumer Reports.
Conclusion
American Standard is in my opinion the best piece of residential equipment on the market today. Matching up a LP furnace and a good efficient Heat Pump will save you tons of money and give you years of great service.
Commercial Daikin Ductless
New Commercial Daikin Ductless.
Daikin in my opinion makes the best ductless mini split system that's currently on the market today. That being said because of my customers unique lab environment and the massive heat gains that are produced they are in need of some serious air conditioning. With so many heat gain variables within the space we elected to add a Commercial Daikin Ductless system in stages.
Adding Stages As Needed
The concrete pad was poured large enough to accommodate more identical Daikin units. Therefore they could easily add more units next to this one as their facility grows.
For the indoor unit we have chosen the Daikin matching cassette unit. The indoor unit delivers the air conditioning exactly where we want it, it is practically flush with the ceiling and its super quiet. I find that it is a little harder to install than a typical mini split wall head ... but in this case its perfect for our customer.
Conclusion
This New Commercial Daikin Ductless system is going to work out perfect for our customer, and as they grow they will be able to add even more units/stages.
Munchkin Boiler Replacement
Costly Munchkin Boiler.
Almost every Munchkin boiler we come across has a history of problems. This particular Munchkin just started to have issues ... my customer elected not to go down the costly repair route that these boilers are famous for.
The Flash Boiler
The idea behind this Munchkin Boiler is to flash heat the water, by doing so you have a very small compact unit. BUT in my opinion its this compact design that can led to serious issues, like clogging of the burn chamber and or the heat exchanger itself. This type of clogging can lead to serious costly failures.
Munchkin To Burnham
The new Burnham ECS boiler is a cast iron boiler with an optional outdoor reset, perfect for this application. The Burnham boiler efficiency is a little less than the Munchkin Boiler but I feel it is a more reliable, and will last a lot longer with fewer repair bills.
Conclusion
Flash boilers have very small ports on both the inside and the outside of the exchanger, without proper maintenance they will clog and cause costly repairs.
Bow Wa Boiler Replacement
Bow Wa Boiler Replacement.
When it comes to boilers we really don't have a favorite brand or model, we actually look at the situation and then pick a boiler that will actually work the best. That being said, we do have a list of favorite boilers we like to use. In this Bow Wa Boiler replacement the Burnham ESC boiler fit the bill.
Maintenance was the key
Our customer actually had a fairly new high efficient boiler already installed, the problem was it kept breaking down. So much so that he decided to have it replaced with a much simpler boiler. As it turned out we had found that the top of the heat ex-changer was almost totally plugged and the gas pressure going into the boiler was not properly set. All of this was overlooked for years by the company doing his maintenance, and that company was the original installation company.
The Burnham ESC
In this situation we had picked the Burnahm ESC boiler, reason being they are very basic, durable, easy to install and you can add modules to them. The boiler is great in low temperature applications, like for in-floor systems or it can easily handle high heat base boards applications as well.
Conclusion
Make sure when your having maintenance done on your boiler system (especially high efficient systems) that its done properly. A good installation company is not always a good service company.
