Extending the life of a residential hot water heater can save money and prevent potential water damage as well as other related costly repair problems. Here are a few useful tips for homeowners wishing to maintain a residential water heater in top condition year-round. One example is to simply know where the water heater is located within your home. Be sure that there is clear access to this important home appliance and that the plumbing is easily accessible in the event that repairs or immediate action is required.
Powered by Propane
In addition it is recommended by most professionals that you know what type of water heater you have installed. For example, is the water heater powered by propane, electric or natural gas. Perhaps you have a tankless type water heater. Whatever the case may be, knowing well in advance what kind of device is installed in your home can ultimately save a lot of time, trouble and money. Experts in the industry recommend that homeowners write down in a safe place the serial number and model number of the unit that is installed in their home.
Model Number
This information is vital and important especially for a professional plumber who may end up working on the unit at some point. Keep in mind that embedded within the serial number and model number is information on gallon capacity as well as the age of the appliance. Equally important is to know where and how to turn off the flow of water to a water heater. Knowing how to shut the water off quickly in addition to the power or fuel supply for the unit can prevent water damage and other situations that could result in expensive repairs.
Adequate Airflow
Finally, keep the area around any water heater clear and free of debris at all times. This ensures that if a leak develops that you will notice it quickly. If the area surrounding the heater is cluttered it may not be as easy to identify developing leaks. Also ensure that there is adequate airflow around the unit. This is especially true of water heaters that use gas as a fuel. A lack of adequate airflow can result in reduced efficiency and even result in damage to the burner chamber or other parts and components within the unit. Contact Alpine Heating & Cooling today for Burlington WA HVAC services that always get results.
Takagi Tankless
Today more than ever before consumers are turning to tankless water heaters as a way to lower energy consumption and decrease utility expenses in general. That said keep in mind that this type of water heater requires a special type of venting in order to blow hot exhaust gas outside of the home as a way to dissipate heat. Different from conventional water heaters, tankless hot water heaters require unique and creative venting options.
Direct Vent Pulls Air From the Outside
Keep in mind that in many cases the installation of this type of water heater results in a more attractive and less expensive finished product. Perhaps the most important aspect of a tankless water heater is that it will save considerable space. Tankless water heaters can be vented in one of two ways. They can either be vented via a power vent or direct venting. A direct vent pulls air from the outside of the home and will typically have two vent openings used for exhaust and intake.
Outside Tankless Water Heaters
This kind of configuration is unique in that it allows a tankless unit to fit in a much smaller spaces than would otherwise be the case. Conversely, power vent type units only require that there be adequate exhaust venting available. That said, a power vent unit usually requires a larger area so that adequate volumes of air are available and so that normal combustion is assured. There are other types of units that are known as outside tankless water heaters. These are good because they can free up a lot of indoor space. Best of all, an outside unit requires no additional venting.
High Efficiency Levels
When installing a unit that does require outside venting remember that venting can be through a sidewall or roof or any other number of other unique venting options. Finally, there are units that are known as condensing tankless water heaters. These are a good choice because they can lower energy costs thanks to very high efficiency levels. With the lower cost of installation associated with nonmetal parts being used, a condensing tankless water heater may be the perfect choice for today’s modern homeowner. Contact Alpine Heating and Cooling today to learn more about Mount Vernon Washington HVAC systems and services with a proven record.
Modern innovations in HVAC systems have allowed more options for homeowners and businesses today than even just a few short years ago. A ductless mini split heat pump is a unique type of heating system that effectively eliminates energy inefficiencies that are often seen in ducted heating and cooling systems. In fact, a typical ductless mini split can reduce energy inefficiencies by up to 30% or more. These systems are typically easy to install, quiet and efficient and may even be eligible for a variety of energy rebates.
Type Of Installation
One of the best advantages of using this type of heat pump system is that they are ideal for the zone heating or cooling of specific areas of an interior space. In most cases, this type of system can be installed and be up and running within a matter of hours. A ductless mini split heat pump is easy to operate, easy to maintain and will typically last for many years once installed. It is important to note that not all homes are suited for this type of installation. For example, some homes would require too many separate many split systems to be considered cost-effective.
Mini Split System
While there are a variety situations where this kind of heating or cooling system would be ideal there are other cases where a more robust and comprehensive system would be more appropriate. That is why it is important to talk with your heating and cooling professional to find out which system will work best for your particular needs. Keep in mind that the portion of a mini split system that is installed indoors can at times be bulky and easily visible. Those who prefer a more hidden type of system may wish to consider other options.
Heating And Cooling
All said a ductless mini split is an excellent option when used in the right type of application. Having a professional assessment of your home or business is usually the perfect place to begin when determining whether or not this type of heating and cooling option is the most appropriate. Many factors are taken into account such as the size of the interior space and the area that requires heating and cooling. The electrical panel and the type of construction as well as the existing system in use are all taken into account when determining if a mini split system is best. Contact Alpine Heating & Cooling today for Mount Vernon HVAC system service and sales.
Good Airflow and Better Indoor Air Quality
Natural ventilation plays an important role in helping to keep your home fresh, healthy and clean. Simply stated, natural ventilation is created when fresh outdoor air is allowed to enter living spaces and flow freely. Natural ventilation does not require an air-conditioning unit or fans. Sometimes referred to as passive cooling, this kind of ventilation is completely free and highly effective in keeping any home looking and smelling fresh. Here are a few easy ways to improve natural ventilation in your existing home or even if you plan on building a new home.
Improved Air Movement
For example, choosing furnishings that are made of breathable materials such as wicker or bamboo can help to encourage improved air movement throughout your home. The very nature of this type of furniture allows for good airflow thanks to minimal heat retention and an overall airy construction. While this kind of furniture is frequently used outdoors it can easily be used indoors to create a unique and inviting look while improving overall interior airflow.
Improve Indoors Air Quality
Equally important is to get into the habit of opening windows frequently especially when the weather is nice. Opening windows is a great way to save energy used by electric fans and other types of air conditioning or cooling systems in your home. Keep in mind the fresh airflow can actually substantially improve indoor air quality. Those building a new home will find that proper window orientation can easily improve cross ventilation. This can be as simple as placing windows on north or south facing sides of the home. Smart design when building a home can greatly increase good airflow in all interior spaces.
Design of the Structure
Another great way of improving airflow when considering the design of a new home is to include transitional spaces throughout the design of the structure. This can include adding atriums, courts, balconies, patios and other types of open outdoor spaces that will help to encourage outdoor living and better airflow. Keep in mind that the advantages of maximizing natural ventilation cannot be overstated. Improved indoor air quality, reduced energy usage and a better overall indoor living experience are just some of the benefits of getting it right when it comes to natural ventilation in your residential home. Contact Alpine Heating and Cooling today for the best in Burlington WA HVAC services that get results.
While nothing compares to having your HVAC system maintained by a professional HVAC technician, there are some things, you, the homeowner can do between check-ups to keep your system running at peak performance. Best of all, regular HVAC care and maintenance will improve efficiency and even lower energy costs. One example of a great way to keep your system running at its best is to change filters frequently. Remember that a dirty filter will restrict airflow causing a system to work harder.
Check Refrigerant Lines
A clogged filter will also have a direct impact on indoor air quality. Plan to change the filter on your HVAC system every 90 days to gain maximum benefit. At the very least it is a good idea to check filter condition on a monthly basis and change as necessary. Equally important is to check refrigerant lines that run into your home. Look for frost accumulation and any possible leaks. If a leak is detected it is important to call in a qualified Burlington WA HVAC technician as soon as possible.
Keep the Entire Interior of Your Home Clean
Cleaning a system often is also a great way to improve efficiency and to extend the life of that system. In fact, one of the best ways to keep a residential HVAC system in top condition is to simply keep the entire interior of your home clean. A clean home that is free of dust and dirt will result in a cleaner HVAC system. Clean floors and curtains often and especially vents and heat registers. The air handling unit and the outdoor compressor unit should also be the targets of regular and frequent cleaning.
Quick Fix When Dealing with Mold
Finally, mold is a serious issue and must be addressed as soon as discovered. Keep in mind that a mold problem that goes unmanaged can quickly become a major issue for homeowners. Mold spores can spread very quickly and can be transported via airflow through the HVAC system. If you suspect mold in your home have a professional diagnose the problem and take corrective action as soon as possible. A quick fix when dealing with mold is to use household bleach to stop growth until a professional is able to deal with the problem. Contact Alpine Heating & Cooling today for the best in Bellingham HVAC services.
American Standard Heat Pump
Saving money is more important today than it has ever been in the past. This is especially true when it comes to improving the efficiency of an existing home heating or cooling system. First it is important to understand that most heating and cooling systems are not created the same. Different systems will produce different results and can have varying levels of efficiency. Simply stated, always make a smart decision when installing an HVAC system in your home as a way to keep utility bills as low as possible without sacrificing comfort.
Heating and Cooling Costs
It is important to note that in most typical residential homes, heating and cooling costs can account for almost half of a total monthly energy bill. Those with units that are older than 10 years old should consider replacing them with an Energy Star compliant system. This simple money saving strategy alone can save a homeowner upwards of 30% or more on annual heating and cooling costs. For the absolute best in seasonal energy efficiency, few other types of HVAC systems can compare ones that are fully Energy Star compliant.
Replacing Equipment
When it comes to replacing a central heating or cooling system here are a few other useful money saving tips worth considering. For example, anytime equipment requires frequent and costly repairs or energy bills are steadily on the rise it may be time to replace your existing system. In addition, when replacing equipment always select energy-efficient systems that meet smart energy saver standard programs or that offer rebate programs or other standard rebates. Many homeowners are surprised to find that this can help offset the cost of replacing an entire HVAC system. While high-efficiency systems can be more expensive initially, the cost will almost always be offset and paid back over time in the form of lower annual energy costs.
Annual Inspections
Finally, regular maintenance can be extremely helpful in preventing future heating and cooling system related problems. Work with an experienced and knowledgeable team of professional HVAC technicians to ensure that your system is properly maintained year-round. Having annual inspections of your system and occasional cleanings can ensure that it lasts longer and performs better. Springtime is the perfect time to check your heating system for possible failure. Contact Alpine Heating And Cooling today to learn more about Mount Vernon Washington heating and cooling services that get results.
Today more than ever before it is important to take the necessary steps to make sure that your household furnace is always operating at peak levels. Here are a few useful tips on keeping your home furnace working perfectly year-round. For example, it is important to make safety a top priority when working on a furnace. Turn off the power to the unit at the main electrical panel before beginning any type of inspection if you plan to do this kind of maintenance on your own.
Furnace Fan Motor Working Harder Than Necessary
In addition, it is a good idea to get into the habit of replacing the batteries in carbon monoxide detectors and smoke detectors at regular intervals. Also make certain that clean air filters are routinely installed in the system. In fact, changing filters twice annually or even more often for those who live in environments that are dusty is a good policy. A dirty air filter will typically result in a furnace fan motor working harder than is necessary.
Duct Cleaning Company
Another way to keep a furnace working at its best at all times is to plan to have a professional ventilation cleaning company service ductwork at least every two years. Homes that have been recently remodeled are particularly susceptible to dust and debris accumulating in ductwork. A duct cleaning company should be called upon anytime renovation or remodeling work has been performed. Ventilation cleaning also helps to reduce the chances of mold growth in ducting. Preventing mold growth is especially important in homes where there are elderly or those who have allergy related problems. Another great way to keep an HVAC system operating at its best is to frequently check all vents and registers for any possible obstructions.
Normal Airflow And System Operation
Anytime a register or vent is blocked, air movement is hindered thereby causing a disruption in normal airflow and system operation. Finally, keeping a furnace running in a healthy way requires an occasional deep cleaning. This can be done by taking off the furnace access panels and using a vacuum to remove debris and dust that may have accumulated or settled over time inside the unit. Contact Alpine Heating and Cooling today to learn more about Burlington Washington HVAC services that are designed to keep your system running perfectly year after year.
Remove Odors and Pollutants
Perhaps one of the most important concerns when it comes to indoor air and health is to ensure proper ventilation in any typical residential home. Good ventilation helps to remove odors and pollutants and prevents air from becoming too stagnant. Not only will good indoor home ventilation improve health but it also serves to protect your home interior over the short and long-term. One major issue in terms of properly ventilating a home or business is that of condensation. When moist warm air makes contact with cold surfaces inside a structure condensation can occur.
Unhealthy Living Environment
Condensation can be seen forming on ceilings, walls and glass and can also accumulate in curtains and carpeting. Perhaps most concerning of all when talking about condensation is that over time it will result in the formation of mold and mildew. This can turn a healthy home into an unhealthy living environment very quickly. Keep in mind that properly insulating a home along with good ventilation will greatly reduce the chances of developing mold and mildew. One of the most alarming aspects of mold and mildew is that it may result in black mold. This can have serious health consequences.
Fuel-Burning Appliances
Ventilation can take on many different forms including static ventilation as well as the installation of a fan or multiple fans for more active air movement. Ventilation that is static in nature simply involves adding interior grills or other types of fixed openings used to allow for constant airflow and air evacuation. For example, clothing dryers require some type of static ventilation. Talk with your HVAC professional to determine how best to take advantage of static ventilation in your home. This type of ventilation is particularly important in homes where there are fuel-burning appliances.
Wood-Burning Stoves
Installing a fan really is a great way to remove stale air and replace it with fresh air in a house. As mentioned, fan installation and air movement is particularly important in homes using fuel-burning appliances or wood-burning stoves. This is simply due to the fact that carbon monoxide exposure can become a problem. Finally, exhaust fans are frequently used to ventilate homes and especially kitchens and bathrooms. This type of fan is usually ducted to the outside of the house as a way to evacuate stale or stagnant air. To have an exhaust fan installed in your home consult with your Burlington WA HVAC expert to learn more. Content Alpine Heating and Cooling today for quality Mount Vernon WA HVAC services.